DynaMed Release History
Releases
20 / 21 Releases
In Development
1
"My Devices" Filter
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIn der Geräteübersicht lässt sich die Liste jetzt mit einem Klick auf die Geräte einschränken, für die der angemeldete Benutzer als Hauptverantwortlicher eingetragen ist. Ergänzend steht eine Spalte „Mein Gerät" zur Verfügung, die bei Bedarf eingeblendet werden kann.
ENIn the device overview, the list can now be restricted with a single click to the devices for which the logged-in user is registered as the main responsible person. In addition, a "My device" column is available and can be shown when required.
26.3.19.0
1
Opening Linked Inventory From a QM Document Fails
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Öffnen eines mit einem QM-Dokument verknüpften Inventareintrags konnte es zu einer Fehlermeldung kommen.
ENOpening an inventory item linked to a QM document could result in an error.
26.3.12.0
2
Field for the UDI ID
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs wurde ein neues Feld zur Eingabe der UDI-ID hinzugefügt.
ENA new field for entering the UDI ID has been added.
Show "Device Class" Column
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIn der Übersichtsliste wurde die Spalte „Geräteklasse” (Spaltenauswahl) hinzugefügt.
ENThe "Device Class" column has been added to the summary list.
26.2.20.0
1
Change Inventory Management View to show Batches Instead of Articles
\DynaMed\Desktop Application\Quality-Management\Inventory
DEÄnderung der Ansicht der Inventurverwaltung. Anzeige von Chargen statt Artikeln.
ENChange Inventory Management View to show Batches Instead of Articles
26.2.8.0
1
It should be possible to "archive" inventory documents
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDokumente, die einem Inventareintrag zugeordnet sind, können nun als archiviert markiert werden.
ENDocuments associated with an inventory entry can now be marked as archived.
26.1.35.0
1
Revise the zoom algorithm of the control chart
\DynaMed\Desktop Application\Quality-Management\Inventory
26.1.13.0
2
Drag and drop support for event documents
\DynaMed\Desktop Application\Quality-Management\Inventory
Remark field for employee inventory
\DynaMed\Desktop Application\Quality-Management\Inventory
26.1.11.0
1
Device manager and deputy as hidden columns
\DynaMed\Desktop Application\Quality-Management\Inventory
25.4.33.0
1
The comment on the event should allow for longer text entries
\DynaMed\Desktop Application\Quality-Management\Inventory
25.4.18.0
1
Column "Electrical inspection (date)" is not filled in
\DynaMed\Desktop Application\Quality-Management\Inventory
25.4.17.0
2
Display of inventory categories
\DynaMed\Desktop Application\Quality-Management\Inventory
Inventory lists should not be sorted in binary order
\DynaMed\Desktop Application\Quality-Management\Inventory
25.4.15.0
1
Warranty period
\DynaMed\Desktop Application\Quality-Management\Inventory
25.4.13.0
1
Buttons for editing documents are only active after a new refresh
\DynaMed\Desktop Application\Quality-Management\Inventory
25.4.0.0
1
Inventory events cannot be deleted
\DynaMed\Desktop Application\Quality-Management\Inventory
25.3.12.0
1
Frequent scrolling leads to app crash
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEin schnelles Scrollen durch die Inventarliste konnte zu einem Absturz des Programms führen.
ENScrolling quickly through the inventory list could cause the programme to crash.
25.3.11.0
1
Show "electrotechnical control" in the overview
\DynaMed\Desktop Application\Quality-Management\Inventory
25.3.4.0
2
Cancel when entering a lock entry
\DynaMed\Desktop Application\Quality-Management\Inventory
Changed device types are only displayed on the lock label after a DynaMed restart
\DynaMed\Desktop Application\Quality-Management\Inventory
25.3.1.0
1
An exception occurs when deleting the service company
\DynaMed\Desktop Application\Quality-Management\Inventory
25.2.21.0
121
“Electrotechnical check” is not displayed as the next test
\DynaMed\Desktop Application\Quality-Management\Inventory
Add Company to Inventory Instruction
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei der Einweisung können nun auch Firmen gewählt werden.
ENCompanies can now also be selected during the instruction.
Add date and several instructed persons to briefing
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei der Einweisung kann jetzt auch ein Datum angegeben werden. Zusätzlich können mehrere Eingewiesene Personen angegeben werden.
ENDate added to the Briefing dialog, also multiple instructed persons can be added
Add remark field
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Invenateintrag wurde eine Bemerkung hinzugefügt.
ENA remark was added to the invenat entry.
Add variables to inventory document number prefix
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Nummernerzeugung eines Dokumentes kann nun mittels einer Vorlage konfiguriert werden.
ENThe number generation of a document can now be configured using a template.
Adding several instructed persons at the same time
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs können nun mehrere eingewiesene Personen unter einmal hinzugefügt werden.
ENMultiple briefed persons can now be added under once.
Alarm suspension
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Eingabe zum Aussetzen eines Alarms wurde überarbeitet.
ENThe input for suspending an alarm has been revised.
All devices are shown
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIn den Optionen werden alle Inventar Typen angezeigt, unabhängig vom ausgewählten Zentrum.
ENAll inventory types are displayed in the options, regardless of the selected center.
Assign qm documents to device
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEinem Gerät können nun Dokumente aus dem Qualitätsmanagement zugeordnet werden.
ENDocuments from quality management can now be assigned to a device.
Assigned tasks should be deactivated upon decommissioning or sale
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIm Rahmen des Verkaufs oder der Stilllegung können verknüpfte Aufgaben deaktiviert werden.
ENLinked tasks can be deactivated as part of the sale or decommissioning process.
Attach different file types
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs ist nun möglich, bei den Messungen auch andere Dateitypen als nur PDF anzufügen.
ENIt is now possible to attach file types other than just PDF to the measurements.
automatic file name transfer inventory event
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei einem Ereignis wird nun der Name eines hinzugefügten Dokuments automatisch übernommen.
ENAt an event, the name of an added document is now automatically adopted.
automatic measurements in device not visible when creating new
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBug behoben der die Automatische Messungen Tabpage ausgeblendet hat obwohl sie angezeigt werden sollte
ENSolved a bug where autoamtic measurements could not be selected in device
Can't add new parameter
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs konnte kein neuer Parameter hinzugefügt werden.
ENNo new parameter could be added.
Can't edit default event type
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs gab keine Möglichkeit die Standardereignisse in den Optionen anzupassen.
ENThere was no way to customize the default events in the options.
Can't open device document list
\DynaMed\Desktop Application\Quality-Management\Inventory
DEFehlermeldung im Gerätemanagement wenn auf den Reiter Dokumente gewechselt wird
ENException in the device management when opening the documents tab
Center filter for document categories can be removed
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDer Zentrumsfilter für die Dokumentenkategorien wurde entfernt. Kategorien stehen nun Zentrumsübergreifend zur Verfügung.
ENThe center filter for document categories has been removed. Categories are now available across centers.
Change wording of filter "devices to proof"
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Filter des Registers "Zu prüfende Geräte" wurden überarbeitet.
ENThe filters of the register "Devices to be tested" have been revised.
Changing a sensor for a parameter no longer works
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDer Sensor eines Inventareintrages konnte nicht mehr bearbietet werden.
ENThe sensor of an inventory entry could no longer be edited.
Check read permission
\DynaMed\Desktop Application\Quality-Management\Inventory
DEFalls der Benutzer keine Leseberechtigung auf die Inventarliste hatte konnte es diese trotzdem im Lesemodus öffnen.
ENIf the user did not have read permission on the inventory list it could still open it in read mode.
Columns are displayed that do not exist at all
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs wurden Spalten angezeigt die für das Mitarbeiterinventar nicht existieren.
ENColumns were displayed that do not exist for the employee inventory.
Combobox selection isn't deletable anymore
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDas Entfernen von gewählten Comboboxeinträgen war nicht möglich.
ENRemoving selected combo box entries was not possible.
Copied device has the same inventorynumber
\DynaMed\Desktop Application\Quality-Management\Inventory
DEKopierte Geräte haben jetzt eine eigene Inventarnummer.
ENCopied devices now have a own inventory number.
Copy Device Service Partner
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim kopieren eines Inventareintrages wurde der Servicepartner nicht übernommen.
ENWhen an inventory entry was copied, the service partner was not copied.
Copy Inventory item
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs ist nun möglich den Inventareintrag zu kopieren.
ENIt is now possible to copy the inventory entry.
Decimal places are no longer possible when entering temperature values
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei der Eingabe der Temperaturwerte waren keine Dezimalstellen mehr möglich.
ENWhen entering the temperature values, decimal places were no longer possible.
Default error weight can't be removed
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEin einmal eingetragener Standard Fehlergrad konnte nicht mehr entfernt werden.
ENOnce a standard error level had been entered, it could no longer be removed.
Device can be retired AND sold
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs können nun Angaben zur Stilllegung eines Geräts und zum Verkauf getätigt werden. Bisher war nur eine Option möglich.
ENIt is now possible to enter information on the retirement of a device and its sale. Previously only one option was possible.
Device label field list isn't correct
\DynaMed\Desktop Application\Quality-Management\Inventory
DEAdressvariablen in den Etiketten korrigiert
ENCorrected address variables within the label designer
Device lock log shows deleted entries
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIm Sperrlog wurden auch gelöschte Einträge angezeigt.
ENThe lock log also showed deleted entries.
Device management is opened in read only mode although the user has read/write permission
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEin Inventareintrag, der mittels Doppelklick geöffnet wurde wurde in der read only Ansicht angezeigt, auch falls der Benutzer Schreib- und Leseberechtigung für die Inventarliste aufweist.
ENAn inventory entry that was opened by double-clicking was displayed in the read only view, even if the user has read and write access to the inventory list.
Device management permission for settings
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs wurde die neue Berechtigung „Administrative Berechtigung Gerätemanagement“ erstellt. Benutzer mit dieser Berechtigung können alle Optionen des Gerätemanagements bearbeiten.
ENThe new permission "Administrative permission device management" has been created. Users with this privilege can edit all device management options.
Device search
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Geräte wurden zur DynaMed Suche hinzugefügt.
ENThe devices were added to the DynaMed search.
device type options have no permission node
\DynaMed\Desktop Application\Quality-Management\Inventory
DEsolved a bug where there was no permission for device types in permission form
ENsolved a bug where there was no permission for device types in permission form
Devices grid in Alarm Groups is editable
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDas Grid in den Optionen der Alarmgruppe war fälschlicherweise editierbar.
ENThe grid in the options of the alarm group was erroneously editable.
Dialog edit for automatic measurements
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDas Bearbeiten der Automatischen Messungen erfolgt nun über einen Dialog anstelle des inplace bearbeitens.
ENEditing the automatic measurements is now done via a dialog instead of the edit inplace.
Dialog edit for automatic measurements - can't activate alarm
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei den automatischen Messungen konnte der Alarm nicht mehr aktiviert bzw. deaktiviert werden.
ENAt the automatic measurements the alarm could not be activated or deactivated.
Dirty isn't set
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim ändern eines Dokuments wird die "OK" Schaltfläche nicht aktiv.
ENAfter a document got changed the "ok" button wasn't enabled.
Disabled measurement devices
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei der automatischen Routineprüfung standen Prüfgeräte zur Auswahl obwohl diese bereits stillgelegt oder verkauft wurden.
ENIn automatic routine testing, test equipment was available even though it had already been shut down or sold.
Display maintenance in the overview
\DynaMed\Desktop Application\Quality-Management\Inventory
DEInformationen zu den Wartungen stehen nun in der Inventarübersicht zur Verfügung.
ENMaintenance information is now available in the inventory overview.
Display measurement type
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei den vorhandenen Messungen wird nun angezeigt ob es sich um eine manuelle Messung oder eine automatische Messung gehandelt hat.
ENThe available measurements now show whether the measurement was manual or automatic.
Display personnel numbers at instructions
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei den Einweisungen wurde die Spalte "Personalnummer" hinzugefügt.
ENThe column "personnel number" has been added to the instructions.
Document add feature is very slow
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Hinzufügen-Funktion des Dokumentenregisters war sehr langsam.
ENThe add function of the document register was very slow.
Document numbering
\DynaMed\Desktop Application\Quality-Management\Inventory
Document numbering template should be configurable
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie automatisch generierten Dokumentennummer können nun mit einem Präfix generiert werden.
ENThe automatically generated document number can now be generated with a prefix.
Drag & Drop for documents
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDokumente können nun per Drag & Drop hinzugefügt werden.
ENDocuments can now be added using drag & drop.
dynamed throw a exception then you take a dot not a comma
\DynaMed\Desktop Application\Quality-Management\Inventory
Electrotechnical control
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Eingabemöglichkeit von Daten für die "Elektrotechnische Kontrolle" wurde hinzugefügt.
ENThe option to enter data for “Electrotechnical control” has been added.
Employee is specified even if the device was returned
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei einem zurückgegebenen Gerät wurde der letzte Mitarbeiter in der Liste angezeigt.
ENFor a returned device, the last employee in the list was displayed.
Entering routine tests did not work correct
\DynaMed\Desktop Application\Quality-Management\Inventory
Error message when saving a device
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDer Inventareintrag konnte nicht mehr gespeichert werden.
ENThe inventory entry could no longer be saved.
Error when opening a replacement part
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Öffnen des Lagerartikels über den Register "Ersatzteile" kam es zu einer Exception.
ENWhen opening the stock item via the " replacement parts" tab, an exception occurred.
Error when opening the routine test if no device or room has been assigned to the task
\DynaMed\Desktop Application\Quality-Management\Inventory
DEFehler beim Öffnen des Reiters "Routineprüfungen" falls eine Prüfung keiner Aufgabe zugeordnet war.
ENError opening the "routine checks" tab if a check was not assigned to a task.
Event documents can't be deleted
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs war nicht möglich einem Ereignis zugeordnetes Dokument wieder zu löschen.
ENIt wasn't possible to delete a document which was assigned to an event.
Event name can't be grouped in grid view
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs konnte nicht nach der Spalte „Ereignisname“ (Register „Ereignisse“) bei einem Gerät gruppiert werden
ENEs konnte nicht nach der Spalte „Ereignisname“ (Register „Ereignisse“) bei einem Gerät gruppiert werden
Events are only refreshed after DM restart
\DynaMed\Desktop Application\Quality-Management\Inventory
Exception if document name is too long
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEin zu langer Dokumentenname führte zu einem Fehler.
ENAn error was displayed if the document name was too long.
Exception when creating a new company
\DynaMed\Desktop Application\Quality-Management\Inventory
DEFehlermeldung wenn ein neuer Geräte Hersteller im Qualitätsmanagement erstellt wird
ENException when creating a new device company in Quality Management
Exception when editing an inventory parameter
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Bearbeiten eines Inventartypen kam es zu einer Fehlermeldung.
ENWhen editing an inventory type, an error message was displayed.
Exception while unchecking testing instrument
\DynaMed\Desktop Application\Quality-Management\Inventory
DEFehlermeldung wenn ein Gerät als Testinstrument gesetzt wird
ENError message when a device is set as a test instrument
Export der Geräte erfolgt in das Rootverzeichnis von DynaMed ohne Abfrage des Speicherortes
\DynaMed\Desktop Application\Quality-Management\Inventory
Export for routine check -> Input
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs ist nun ein MS Excel Export für die Routineprüfungen eines Gerätes verfügbar.
ENNow there is a MS Excel export for the routine tests of a device.
Fehlermeldung beim hinzufühgen von Prüfmittel
\DynaMed\Desktop Application\Quality-Management\Inventory
Filter "my devices" isn't working
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDer Filter "Eigene Geräte" war ohne Funktion.
ENThe filter "own devices" wasn't working.
GDI+ exception
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim wechseln auf den Register "Dokumente" wurde der Dialog nicht mehr neu gezeichnet.
ENSelecting the "documents" register lead to a form draw exception.
Generated document id is too long - document can't be saved
\DynaMed\Desktop Application\Quality-Management\Inventory
DEFalls die Vorlage zur Nummergenerierung der Dokumenten ID eine zu lange Nummer erzeugte war es nicht möglich dem Ereignis ein Dokument anzuhängen.
ENIf the document ID number generation template created a number that was too long, it was not possible to attach a document to the event.
Handover and return protocol
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs kann nun ein Übergabe- und Rückgabeprotokoll für einen Benutzer ausgedruckt werden.
ENA handover and return protocol can now be printed out for a user.
History of alarm suspension
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs ist nun ein Verlauf über die bisherigen Alarmaussetzungen verfügbar.
ENA history of the previous alarm suspensions is now available.
Improvements in the alarm conditions
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Erstellen einer neuen Alarmaussetzung, ist es nun nicht mehr möglich ein "leeres" Datum anzugeben.
ENWhen creating a new alarm suspension, it is now no longer possible to specify an "empty" date.
In the case of test equipment, the tab "measurements/events" is no longer displayed
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei Prüfmitteln wurde der Register "Messungen/Ereignisse" nicht mehr angezeigt.
ENFor test equipment, the "Measurements/Events" tab was no longer displayed.
In the inventory list options the last number isn't loaded correctly
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIn den Gerätelisteoptionen wurde die zuletzt vergebene Nummer nicht korrekt angezeigt.
ENIn the device list options, the last number assigned was not displayed correctly.
Indicate if a device is sold or inactive
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs wird nun angezeigt ob ein Gerät verkauft oder inaktiv ist.
ENIt is now displayed whether a device is sold or inactive.
Inspect diagram can't be loaded
\DynaMed\Desktop Application\Quality-Management\Inventory
DEAutomatische Messungen wurden nicht auf der Regelkarte dargestellt.
ENAutomatic measurements were not displayed on the chart.
Introduce no_value flag in qm_measurement table
\DynaMed\Desktop Application\Quality-Management\Inventory
Inventory document import improvements
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBezeichnung wird automatisch gefüllt sofern sie leer ist. Mehrfachimport ist möglich.
ENDescription is filled automatically if it is empty. Multiple import is possible.
Inventory Type Option throws column not found error
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDas Öffnen der Option "Inventartypen" im Qualitätsmanagement führte zu einer Fehlermeldung.
ENOpening the "Inventory types" option in Quality Management resulted in an error message.
It should be possible to input document categories for various mandators
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Inventar-Dokumentenkategorien können nun auch für andere Zentren im Zentrumsverbund global gepflegt werden.
ENThe inventory document categories can now also be maintained globally for other centers in the center network.
List of inventory types is not sorted
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Liste der Inventartypen wurde nicht sortiert.
ENThe list of inventory types was not sorted.
Load/Reload tabs when needed
\DynaMed\Desktop Application\Quality-Management\Inventory
Lock reason message shouldn't be displayed
\DynaMed\Desktop Application\Quality-Management\Inventory
DEWurde ein Gerät entsperrt wurde die Anzeige "Gerät wurde gesperrt..." erst nach einem erneuten öffnen des Formulars entfernt.
ENIf a device was unlocked, the display "Device locked..." was only removed after reopening the form.
Main responsible person must not be empty
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Erneuten Bearbeiten des Mitarbeiterinventars wurde eine Information angezeigt, dass der hauptverantworliche Mitarbeiter nicht ausgewählt wurde.
ENWhen editing the employee inventory, an information was displayed that the main responsible employee was not selected.
Maintenance intervals aren't shown
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIm Gerätemanagement wurde der Wartungsintervall nicht richtig angezeigt
ENIm Gerätemanagement wurde der Wartungsintervall nicht richtig angezeigt
measurement parameters showing more than once in qm device
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBug behoben bei dem Parameter öfter angezeigt wurden
ENSolved a bug where parameters showed more than once
Merge feature for inventory document categories
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs ist nun möglich Dokumentenkategorien zusammenzuführen.
ENIt is now possible to merge document categories.
Missing alarm acknowledgement list
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs wurde ein Bericht, der alle nicht quittierten Alarme listet, hinzugefügt.
ENA report listing all unacknowledged alarms has been added.
Move device between two inventory lists
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEin Inventareintrag kann nun zwischen Inventarlisten verschoben werden.
ENAn inventory entry can now be moved between inventory lists.
Multi select and header checkbox
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Header-Checkbox für das Multiselekt wurde entfernt, da die getroffene Auswahl so zu schnell aus Versehen geändert werden kann.
ENThe header checkbox for the multiselect has been removed, since the selection made can be changed too quickly by mistake.
Newly created parameters are not displayed in the measurements
\DynaMed\Desktop Application\Quality-Management\Inventory
Not all devices are displayed in the options of the inventory types
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei den Optionen der Inventartypen wurden nicht alle Geräte des ausgewählten Zentrums angezeigt.
ENNot all devices of the selected center were displayed in the options of the inventory types.
Numeric edit during maintenance can't be entered on fhd screens
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie numerische Eingabe für das Wartungsintervall war auf FullHD-Bildschirmen nicht sichtbar.
ENThe numerical input for the maintenance interval was not visible on FullHD screens.
Official id and category as columns
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Behördliche-Id und die Kategorien können nun als Spalten angezeigt werden.
ENThe authority ID and the categories can now be displayed as columns.
OK button won't get activated when a parameter is changed in qm device location
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie OK Schaltfläche wurde nicht aktiv.
ENThe OK button wasn't enabled.
Open device in tab
\DynaMed\Desktop Application\Quality-Management\Inventory
Open Supplier, Service, Manufacturer Buttons are always enabled
\DynaMed\Desktop Application\Quality-Management\Inventory
Predefined filter
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEs ist nun möglich einen bestehenden Grid-Filter zu speichern und diese später wieder anzuwenden.
ENIt is now possible to save an existing grid filter and apply it again later.
Prefixed qm inventory number
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie automatisch generierten Inventarnummern können nun mit einem Präfix generiert werden.
ENThe automatically generated inventory numbers can now be generated with a prefix.
Rename of device management to inventory
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDas Gerätemanagement wurde in Inventar umbenannt.
ENDevice management has been renamed to inventory.
Replacement device
\DynaMed\Desktop Application\Quality-Management\Inventory
DEEin Inventareintrag kann nun als Ersatzinventar gekennzeichnet werden.
ENAn inventory entry can now be marked as a replacement inventory.
Report "open" and "due tasks"
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDer Register "Aufgabenübersicht" wurde zu den "Routineprüfungen" hinzugefügt.
ENThe "task overview" tab has been added to "routine checks".
Rework the document delete message
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Meldung welche beim Löschen eines Dokuments ausgegeben wurde wurde überarbeitet.
ENThe message issued when deleting a document has been revised.
Room names should be shown allthough they are deleted
\DynaMed\Desktop Application\Quality-Management\Inventory
Room number '1.1' is displayed as '1' in the inventory list
\DynaMed\Desktop Application\Quality-Management\Inventory
DERaumnummern mit dem Format "1.1" wurden in der Inventarverwaltung mit "1" angezeigt.
ENRoom numbers with the format “1.1” were displayed as “1” in the inventory management.
Sell device to an internal mandator and create copy
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Käufer eines Inventar kann nun auch ein internes Zentrum angegeben werden.
ENWhen purchasing an inventory, it is now possible to specify an internal center.
should be exportable to selectable destination
\DynaMed\Desktop Application\Quality-Management\Inventory
Show acquisition, decommissioning and sale dates
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Spalten (Spaltenauswahl) Anschaffungs-, Stilllegungs- und Verkaufsdatum wurden hinzugefügt.
ENThe columns (column selection) Acquisition date, Decommissioning date and Sale date have been added.
Show small print dialog when only one Inventory-label is available to print
\DynaMed\Desktop Application\Quality-Management\Inventory
DEWenn nur eine Vorlage für das Drucken eines Inventaretiketts vorhanden ist, dann wird der Auswahldialog übersprungen.
ENIf there is only one template for printing an inventory label, the selection dialog is skipped.
Show the remark of the task at the measurements and events
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBei den Ereignissen und Messungen, wird nun zusätzlich die bei der Routineprüfung eingegebene Bemerkung angezeigt.
ENIn the events and measurements, the remark entered during the routine check is now additionally displayed.
Show upcoming proof events
\DynaMed\Desktop Application\Quality-Management\Inventory
DEBeim Reiter "Zu prüfendes Inventar" kann nun auch eine Vorschau über in der Zukunft zu prüfendes Inventar angezeigt werden.
ENThe "Inventory to be checked" tab can now also display a preview of the inventory to be checked in the future.
some service dates are not displayed
\DynaMed\Desktop Application\Quality-Management\Inventory
DEfixed a bug that caused the servicedate to not be displayed in device management
ENfixed a bug that caused the servicedate to not be displayed in device management
Staff inventory
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDas Mitarbeiterinventar kann nun über DynaMed verwaltet werden.
ENThe employee inventory can now be managed via DynaMed.
Standort und Wartungsintervalle werden nicht gespeichert
\DynaMed\Desktop Application\Quality-Management\Inventory
Supplier, manufacturer and service entry should offer better search functionality
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Eingabesteuerelemente für den Lieferanten, den Hersteller und das Serviceunternehmen bieten nun eine vereinfachte Eingabe.
ENThe input controls for the supplier, the manufacturer and the service company now offer simplified input.
The search function no longer works
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Suchfunktion des Gerätemanagements funktionierte nicht mehr.
ENThe search function of the device management did not work anymore.
The sorting of the inventory list was incorrect
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Sortierung der Inventarliste war fehlerhaft.
ENThe sorting of the inventory list was incorrect.
Time should be shown in the suspended alarm history
\DynaMed\Desktop Application\Quality-Management\Inventory
DEIn der Liste der ausgesetzten Alarme wird nun auch die Uhrzeit angezeigt.
ENThe time is now also displayed in the list of suspended alarms.
Unnecessary tabs should be able to be switched off or should be reorganised
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Anordnung der Register wurde überarbeitet.
ENThe arrangement of the registers has been revised.
Validation message was displayed too often
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Validierungsnachricht bezüglich den Wartungsintervallen wurde bei jedem Speichern des Inventareintrages angezeigt.
ENThe validation message regarding the maintenance intervals was displayed each time the inventory entry was saved.
Value ranges of the inventory types cannot be entered
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Wertebereiche der Inventartypen konnten nicht mehr eingegeben werden.
ENThe value ranges of the inventory types could no longer be entered.
Warning message if only deputy responsible person is selected
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Eingabe eines Stellvertreters kann nur noch nach Angabe eines Hauptverantwortlichen erfolgen.
ENThe entry of a deputy can only be made after specifying a main responsible person.
Warnings for a not performed maintenance is displayed
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Icons für nicht durchgeführte Wartungen wurden fälschlicherweise dauerhaft angezeigt.
ENThe icons for unperformed maintenance were displayed permanently by mistake.
When editing a room, the room name should be displayed in the header
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDer Raumname wird nun beim editieren eines Raumes angezeigt
ENRoom name was added to the room edit
22.1.7.0
1
Add the "CE identifier" column to the list
\DynaMed\Desktop Application\Quality-Management\Inventory
DEDie Spalte "CE-Kennzeichnung" wurde zur Liste (Spaltenauswahl) hinzugefügt.
ENThe "CE marking" column has been added to the list (column selection).